#Jb4 Interface Program how to#
#Jb4 Interface Program code#

When you go back in to the menu system you'll note the map has been updated. The blinkers will flash twice and the in dash menu system will close. When the needle is aligned with the intended setting, for example to change to map2 then speedo=0, tach=2000rpm, you'd press and hold the BC button. The right arrow will light up and now pressing the BC button will move the tach needle to let you change settings. To change a setting when on the menu you want to change press and hold the BC button. The speed = 0 starting menu is for maps with the current map being shown by the tach needle. Note as the speedo modes with each BC press it will not necessarily align with speedometer needle position. To toggle through menu systems press and release the BC button. The left blinker will turn on and the tach/speedo will drop to zero. If you hold the button too long you'll jump in to the in dash menu system below.ĭash mode: By pressing and holding the BC button you'll enter dash mode. The valve setting is persistent and will remain in effect until you change it. The left blinker will flash for valve open, right blinker for valve closed, and both blinkers for OEM operation.

Toggle between flap open, flap closed, and OEM operation, by pressing the button for 2 seconds and letting go. Map4: Stock tuning with JB4 active for logging and in dash gauges Map3: Progressive WMI map (under development)

#Jb4 Interface Program how to#

If you need directions on how to connect a laptop to your JB4 to update firmware or how to datalog Click here. When updating your interface you may need to first go to 'add remove programs' and 'remove' your previous JB4 interface. JB4 Interface: Latest Interface Download.

#Jb4 Interface Program code#

The CANbus data allows us to provide more comprehensive and dynamic tuning, advanced features like code read/delete, in dash map switching, boost targets by gear to improve traction, an in dash boost gauge, and much more.

The MINI B38/B48 JB4 is a new CANbus enabled tuning system offering a lot more features & function than our previous Stage1 system. It is your responsibility to comply with all applicable federal and state laws relating to use of this part, and Burger Motorsports, Inc hereby disclaims any liability resulting from the failure to use this part in compliance with all applicable federal and state laws. USE OF THIS PART IN ANY OTHER VEHICLE MAY SUBJECT YOU TO FINES AND PENALTIES FOR VIOLATION OF FEDERAL AND/OR STATE LAW, WILL VOID YOUR WARRANTY FROM BURGER MOTORSPORTS, INC, AND CAN VOID YOUR VEHICLE'S WARRANTY. Competition-only motor vehicles may not be driven to a racing event on a public highway and must be transported on a trailer or other carrier. Health & Safety Code 39048) This part may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event. California law defines a 'racing vehicle' as 'a competition vehicle not used on public highways.' (Calif. THIS PART IS LEGAL FOR USE ONLY IN COMPETITION RACING VEHICLES AS DEFINED UNDER CALIFORNIA LAW, AND IS NOT LEGAL FOR USE IN ANY OTHER MOTOR VEHICLE. Use subject to terms and conditions posted at